Wide/Narrow Function - Icom IC-440 Instruction Manual

■ Wide/Narrow function

This function temporarily/permanently changes the band-
width between wide or narrow on the RX channel only.
q Select the desired RX channel. (p. 35)
w Enter the RX VFO mode. (p. 35)
e Push
* to toggle the bandwidth between wide or nar-
LOW
row.
Wide channel spacing is selected
Narrow channel spacing is selected
r Push and hold
F
* for 2 sec. to return to the normal op-
SET
eration condition.
• The bandwidth setting is memorised to the channel.
F
• Pushing * also returns to the normal operation condition. In
SET
this case, the bandwidth setting is not memorised to the chan-
nel. (temporary operation)
*Regardless of the assigned key function.
OTHER FUNCTIONS
8
8
37