Table of Contents
Advertisement
5-7
Adding PCI Add-On Cards
The 7047A-73/7047A-T can accommodate standard size add-on cards populated
in all slots on the X9DA7/X9DAi serverboard.
Installing an Add-on Card
1. Begin by removing the PCI slot shield for the slot you wish to populate.
2. Fully seat the card into the card slot, pushing down with your thumbs evenly
on both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shields protect the serverboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.
Chapter 5: Advanced Serverboard Setup
5-15
Advertisement
Table of Contents
