Table of Contents
Advertisement
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed at each
system boot, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue to
boot. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue with bootup procedure. If a
fatal error occurs, you should consult with your system manufacturer for possible
repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the
corresponding error.
Beep Code/LED
1 beep
5 short beeps + 1 long
beep
5 long beeps + 2 short
beeps
1 continuous beep
Appendix A: BIOS Error Beep Codes
Appendix A
BIOS Error Beep Codes
Error Message
Refresh
Memory error
Display memory
read/write error
System overheat
A-1
Description
Circuits have been reset.
(Ready to power up)
No memory detected in the
system
Video adapter missing or with
faulty memory
System overheat
Advertisement
Table of Contents
