Adding Pci Add-On Cards - Supermicro SuperWorkstation 5038A-I User Manual

Populating RDIMM/LRDIMM DDR4 Memory Modules
Ranks
Per DIMM
Type
and Data
Width
RDIMM SRx4
RDIMM SRx8
RDIMM DRx8
RDIMM DRx4
LRDIMM QRx4
LRDIMM 3DS 8Rx4
5-6

Adding PCI Add-On Cards

The 5038A-I can accommodate standard size add-on cards populated in all slots
on the X10SRA motherboard.
Installing an Add-on Card
1. Begin by removing the PCI slot shield for the slot you wish to populate.
2. Fully seat the card into the card slot, pushing down with your thumbs evenly
on both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shields protect the motherboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.
Speed (MT/s); Voltage (V); Slots per Channel (SPC) and
DIMM Capacity
(GB)
E5-2600 V3
4 Gb 8 Gb 1.2 V
8 GB 16 GB 2133
4 GB 8 GB 2133
8 GB 16 GB 2133
16 GB 32 GB 2133
32 GB 64 GB 2133
64 GB 128 GB 2133
5-11
Chapter 5: Advanced Serverboard Setup
DIMMs per Channel (DPC)
2 Slots per Channel
1 DPC
E5-2600 V4 E5-2600 V3
1.2 V
2400
2400
2400
2400
2400
2400
2 DPC
E5-2600 V4
1.2 V 1.2 V
1866 2133
1866 2133
1866 2133
1866 2133
2133 2400
2133 2400