Firebox Installation - Valor RetroFire RF24DN Installation And Owner's Manual

Connection of liners to firebox
Trim liners if necessary and connect to the firebox either while the firebox is on the hearth or with the firebox in the
cavity. Use gear clamps provided to connect the liners to the firebox. If the liners are connected with the firebox on
the hearth, it will be necessary to pull the slack liner up from the top of the chimney after the firebox is installed.
Option 1 - Connect liners with
Support Legs Reinstallation (if removed)
With the firebox recessed behind the smoke curtain of the existing fireplace, raise the firebox and place the
individual support legs under the firebox. Placing a temporary shim under the firebox, such as a 2" x 4", may help
while positioning the support legs. Tabs are provided on the support legs to help position them. Fasten the support
legs at the points indicated by the arrows using the bolts provided (2 per side).

Firebox Installation

Firebox on Hearth
Reach Through
Top or Sides
to Connect Liners
Thread thumbscrews
into Support Leg.
Raise right side of firebox
and slip RH Support Leg
Under. Fasten with 2 bolts
as indicated.
Gear Clamps
Reach Through Front
to Connect Liners
Option 2 - Connect Liners
in Fireplace
Thread thumbscrews
into Support Leg.
Raise left hand side of firebox
and slip LH Support Leg
Under. Fasten with 2 bolts
as indicated.
13