Vent Terminal Location - Valor RetroFire RF24DN Installation And Owner's Manual

Vent Terminal Location

The venting system for this appliance is considered to be a Special Venting System. The rule in the Installation
Code CAN/CGA–B149 requiring a minimum vent height of 2 feet above any portion of a building within 10 feet does
not, therefore, apply.
Clearances for Vent Terminal
Horizontal
overhang
Termination
cap
Vertical
Min.
wall
18"
Storm
collar
Roof
ashing
Vent Termination
Roof Pitch
Overhang
should not
extend beyond
Flat to 7/12
vent if within
48" of termination
over 7/12 to 8/12
cap
over 8/12 to 9/12
over 9/12 to 10/12
Min. 24"
over 10/12 to 11/12
(unvented so t)
Min. 36" over 11/12 to 12/12
(vented so t)
over 12/12 to 14/12
'H'
Minimum
'H' (feet)
1'
1.5'
2'
2.5'
3.25'
4'
5'
9