Firebox Installation - Valor Retrofire RF24IDN Installation And Owner's Manual

QUALIFIED
INSTALLER
Connection of liners to fi rebox
Trim liners if necessary and connect to the fi rebox
either while the fi rebox is on the hearth (Option 1)
or with the fi rebox in the cavity (Option 2). Use gear
clamps provided to connect the liners to the fi rebox.
If the liners are connected with the fi rebox on the
hearth, it will be necessary to pull the slack liner up
from the top of the chimney after the fi rebox is installed.
Option 1 - Connect liners with fi rebox on hearth
Support Legs Reinstallation (if removed)
With the fi rebox recessed behind the smoke curtain
of the existing fi replace, raise the fi rebox and place
the individual support legs under the fi rebox. Placing
a temporary shim under the fi rebox, such as a 2" x 4",
Raise right side of firebox and slip
RH support leg under. Fasten with
2 bolts as indicated.
24

Firebox Installation

Gear Clamps
Option 2 - Connect liners in fi replace
Reach Through Front
to Connect Liners
Reach Through
Top or Sides
to Connect Liners
may help while positioning the support legs. Tabs are
provided on the support legs to help position them.
Fasten the support legs at the points indicated by the
arrows using the bolts provided (2 per side).
Raise left hand side of firebox and slip
LH support leg under. Fasten with
2 bolts as indicated.