Valor RetroFire RF24DN Installation And Owner's Manual page 16

Ceramic Log Set Installation
Carefully remove the ceramic logs from the packaging taking care not to damage them. Install the logs as described
below. Please note that the Rear Log will have a different position depending of the gas type. The position of
the logs is critical to insure the good performance of the appliance.
NG ONLY: Drop Rear Log into place
behind front log retainers.
Front Log locating pins
1
Place R/H Cross Log
Onto Locating Pins
3
Place L/H Cross Log
Onto Locating Pins
5
16
Ceramic Fuel Bed Installation
LPG ONLY:
Drop Rear Log into
place centered side-
to-side against back
support so the log
sits more vertical.
Rear Log Touches
Front Log Here
Place Font Log onto locating
2
Pins at Each End
L/H Log Locating Pins
Place Middle Cross Log
Across Gap in Front Log
4
Right Log
Locating Pins