Other Settings; Setting The Display Brightness (Dimmer); Setting The Display Saver (Disp. Saver); Setting The System Clock - Kenwood K-531 Instruction Manual

Other settings

Setting the display brightness (DIMMER)

Adjust the display brightness according to your preferences and the
conditions in the room.
1

Setting the display saver (DISP. SAVER)

Turn on the display saver if the System is not used at all for a set period. The
display information scrolls to prevent burn-in of the text on the display and
uneven display brightness.
1
2
3

Setting the System clock

1
2
3
4
5
If a power failure occurs or the System is unplugged then plugged in again, set the System clock to
the correct time again.
When the System is in Standby mode, you can display the clock time for 5 seconds by pressing
Press [DIMMER] repeatedly.
Each time you press the button, the mode changes as....
DIMMER OFF (normal brightness) = DIMMER 1 (reduces the
display brightness) = DIMMER 2 (reduces the display brightness
and turn off the dial lighting) = DIMMER 3 (restores the normal
display brightness and turn off the dial lighting) = (back to the
beginning)
Press [MODE].
Press [ 2 ] or [ 3 ] to select "DISP. SAVER", then press
[ENTER].
Press [ 5 ] or [ ∞ ] to select "ON" or "OFF", then press
[ENTER].
ON
Activates the display saver if the System is not in used at
all for about 10 minutes after playback stops or a button is
pressed.
OFF Deactivates the display saver.
Press [MODE].
Press [ 2 ] or [ 3 ] to select "TIME ADJUST", then press
[ENTER].
Press [ 5 ] or [ ∞ ] to set the day (of the week), then press
[ENTER].
Press [ 5 ] or [ ∞ ] to set the hour, then press [ENTER].
Press [ 5 ] or [ ∞ ] to set the minute, then press [ENTER].
Safety Precautions
7
.
[ ]
41
English