Table of Contents
Advertisement
•
Always wait until the device has finished reading the CD / USB device before going ahead.
•
If there is no CD in the CD compartment, the message
•
If there is no playable audio data on the USB device, the message
•
With audio files, the read time may exceed 10 seconds if a CD or USB device contains a lot of songs.
Playing back a CD or audio file (USB, CD)
On the remote control:
playback.
On the main device:
begin playback.
For USB devices or CDs containing audio files (such as MP3), the display shows the number of folders and files as
follows:
The number appearing after "F" is the number of folders and the second number set is the total number of files.
Also, for audio CDs, information about the number of tracks and total playing time is displayed as follows:
The first set of numbers represents the number of titles and the second set is the CD's total playing time.
Basic operating functions
Stopping playback:
Press the
Pause playback:
Press the
start to flash. Pressing the button again resumes playback.
Searching for a particular passage during play:
longer than 2 seconds to activate ⏩ or ⏪. Once you have found the correct place, release the corresponding
button.
Choosing a particular track:
stop mode.
To jump to 10 tracks: Press the button +10 or -10 on the remote control in play, pause or stop mode.
Choosing a specific folder (audio files only): Press the Fold+ or Fold- on the remote to choose a
folder.
Programming titles and files
Using the remote control, you can program tracks on an audio CD or files to play in the sequence you want. You
will find the following number of storage locations:
Use the Source button to choose the source and press the Enter button to begin
Use the Source button to choose the desired source and press the Enter button to
FXX
XXX
XX
XX:XX
button on the main device or remote to stop playback.
button on the main device or remote to pause playback. The display will
Press the ⏩ or ⏪ button on the main device or remote in playback, pause or
Audio-CD: 20 storage locations
"NO DISC"
will be displayed.
"NO SONG"
Hold the button ⏩or ⏪ on the main device or remote for
Files: 99 storage locations
will be displayed.
10
Advertisement
Table of Contents
