Download Print this page

Connection - Kenwood K-531 Instruction Manual

Compact hi-fi component system
Hide thumbs

Advertisement

Connection

CAUTION
Main connections
Speakers*
* Both left and right speakers are
the same type.
Speaker cord
(supplied)
Striped
To AC wall outlet
Connecting the FM antenna cord
Use some force to insert the FM antenna cord
into the terminal if it is hard to connect.
Point in the direction that gives
the best reception, and fix using
tape, etc.
8
K-531
Do not plug the AC power cord into an AC wall outlet until all the connections are
completed.
Before disconnecting any cords or cables, always turn the System off and unplug
the power cord from AC wall outlet.
Since antenna installation requires skill and experience, always consult your dealer
before installation. The antenna should be located away from power lines. If the
antenna falls over, contact with a power line creates the risk of electric shock.
Preparing the ends of the speaker cords
Twist
Connecting the speaker cords to the speaker
Connecting the speaker cords to the main unit
Without
stripe
FM indoor antenna
(supplied)
Loose cords may short-circuit and
cause damage to the System.
Rear view
White
Black
Connecting the AM antenna cord
AM loop antenna
(supplied)
Keep the AM loop
antenna cable
wrapped around
the AM loop
antenna frame,
otherwise the
effectiveness and
sensitivity of the
AM loop antenna
may be reduced.
Insert by pushing
until a clicking
sound is heard.

Advertisement

loading

  Related Manuals for Kenwood K-531