Connection Of Other Components And Accessories - Kenwood XD Series Instruction Manual

8

Connection of other components and accessories

Connect separately sold parts as show n in the figure.
Do not plug the pow er cord into the pow er outlet until all
of the required connections have been made.
L
R
Audio cord
Audio input
M D recorder
Connection of system control cord
Plugging the connector
Insert the plug straight into the con-
nector until it locks
Downloaded from: http://www.usersmanualguide.com/
Video cord
Video deck
Audio output
Audio cord
MD AUX
REC PLAY
INPUT
OUT IN
Audio output
Optical fibre cable
Unplugging the connector
While pushing the tw o sides of con-
nector in pull it straight out
For playback or recording from the equipment connected
to the AUX terminals, press the AUX key of the amplifier
input selector key.
For playback from the equipment connected to the M D ter-
minals, prase the M D key of the amplifier input selector keys.
M onitor TV
SPEAKERS
R L
( 6 - 16Ω )
+ − − + CONNECT WITH C-H5 OR C-H6 OR C-H7
SUPER
WOOFER
PRE OUT
ANTENNA
AM
MD AUX
REC PLAY
INPUT
OUT IN
GND
L
FM 75Ω
R
OPTICAL
DIGITAL
OUTPUT
CONNECT WITH
C-H5 OR C-H6 OR C-H7
AND
X-H5 OR DM-H5
CONNECT WITH SYSTEM
DP-H5 OR DP-MH5 CONROL
CONNECT WITH A-H5
Digital input terminal
OPTICAL
DIGITAL
OUTPUT
Remove the protection cap
for use.
(Take care not to lose the
cap)
Note on connection of optical-
fiber cable
÷ Insert the optical-fiber cable straight into
the connector until it clicks.
÷ Be sure to attach the protection cap w hen
the connector is not used.
÷ Never band or bundle the optical-fiber
cable.
÷ All of the optical-fiber cables sold in audio
stores cannot alw ays be used. If the cable
you purchased cannot be connected to
this unit, please consult your dealer or
KENWOOD distributor.
System connection
XD SERIES (En/ E2 )
Remove cap
Optical fibre
cable