Section 8-Wheels; Repairing/Replacing Pneumatic Tire/Tube; Removing/Installing Rear Wheels; Quick-Release Axles - Invacare XtraTM 1026793 Operator And Maintenance Manual

SECTION 8—WHEELS
After any adjustments, repair or service and before use, make sure all attachment
hardware is tightened securely - otherwise, injury or damage may result.

Repairing/Replacing Pneumatic Tire/Tube

Replacement of a pneumatic tire or tube MUST be performed by a qualified
technician.
As with any vehicle, the wheels, casters and tires should be checked periodically for
cracks and wear, and should be replaced.

Removing/Installing Rear Wheels

NOTE: For this procedure, refer to FIGURE 8.1.

Quick-Release Axles

1. Push in the tip of the quick-release axle (with wheel) and pull the axle out through the
opening in the center of the rear wheel.
2. Push in the tip of the quick-release axle again and pull the axle out of the rear wheel.
3. Repeat STEPS 1-2 for the opposite rear wheel.
4. To reinstall the rear wheel onto the axle mounting plate, reverse STEPS 1-3.
Part No 1026793
WARNING
WARNING
CAUTION
51
SECTION 8—WHEELS
Xtra™