Transferring To And From Other Seats - Invacare XtraTM 1026793 Operator And Maintenance Manual

SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS
3. The second assistant, with a firm hold on a non-detachable part of the framework, lifts
the wheelchair up and over the stair and steadies the wheelchair as the first assistant
places one (1) foot on the next stair and repeats STEP 1.
4. The wheelchair should not be lowered until the last stair has been negotiated and the
wheelchair has been rolled away from the stairway.
5. If so equipped, rotate the anti-tippers so the wheels are facing down.
DO NOT use an escalator to move a wheelchair between floors. Serious bodily
injury may occur.

Transferring To and From Other Seats

BEFORE attempting to transfer in or out of the wheelchair, every precaution should
be taken to reduce the gap distance. Align both casters parallel with the object you
are transferring onto. Also be certain the wheel locks are engaged to help prevent
the wheels from moving.
When transferring, position yourself as far back as possible in the seat. This will pre-
vent damaged upholstery and the possibility of the wheelchair tipping forward.
NOTE: For this procedure, refer to
FIGURE 2.3.
NOTE: This activity may be performed
independently provided you have adequate
mobility and upper body strength.
1. Position the wheelchair as close as
possible along side the seat to which
you are transferring, with the front
casters parallel to it.
2. Engage wheel locks.
3. Remove or flip back armrests.
4. Shift body weight into seat with
transfer.
NOTE: During independent transfer, little or no seat platform will be beneath you. Use a transfer
board if at all possible.
Xtra™
WARNING
WARNING
CAUTION
maximum gap distance
FIGURE 2.3 Transferring To and From
20
Other Seats
Part No 1026793