SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Clean quick-release axles with a Teflon
Ensure axles are free from dirt, lint, etc.
Ensure roller bearings are free from dirt, lint, etc.
Adjust wheel locks as tires wear.
Clean and wax all parts.
Troubleshooting
X
X
X
X
X
X
Maintenance
After adjustments and BEFORE use, make sure all attaching hardware is securely
tightened, otherwise injury or damage may result.
DO NOT overtighten hardware attaching to the frame. This could cause damage to
the frame tubing.
Xtra
®
X
If pneumatic tires, check for correct and equal pressure.
X
X
Check for loose stem nuts/bolts.
Check that casters contact ground at the same time.
WARNING
CAUTION
lubricant.
SOLUTIONS
26
Part No 1026793