Using/Adjusting Dual Point Arms; Adjusting Armrest Height; Removing Armrests; Replacing Armrests - Invacare XtraTM 1026793 Operator And Maintenance Manual

SECTION 7—ARMS

Using/Adjusting Dual Point Arms

Make sure the locking mechanism is secured before using the wheelchair.
NOTE: For this procedure, refer to FIGURE 7.3.

Adjusting Armrest Height

1. Unlock the armrest by flipping the
armrest release lever on the top front of
the armrest to the UP (HORIZONTAL)
position.
2. Adjust armrest to desired height.
NOTE: Armrest locks MUST be in the
unlocked position when placing armrest into
the arm assembly.
3. Lock the armrest by pressing the
release lever into the DOWN
(VERTICAL) position when the desired
armrest height is achieved.

Removing Armrests

1. Unlock the arm assembly by flipping the armrest release lever located on the side rail
to the UP (HORIZONTAL) position.
2. Remove armrest from the wheelchair.

Replacing Armrests

NOTE: Armrest release levers MUST be in the unlocked position when placing armrests into the
arm sockets.
1. Lock the armrest by pressing the armrest release lever into the DOWN (vertical)
position.
Xtra™
WARNING
Unlock
(Horizontal)
Armrest
Release
Lever
FIGURE 7.3 Using/Adjusting Dual Point
44
Lock (Vertical)
Armrest
Release
Height Adjustment
Lever
Arms
Part No 1026793
Lever