Reaching, Leaning And Bending - Forward; Reaching, Bending - Backward - Invacare XtraTM 1026793 Operator And Maintenance Manual

SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS

Reaching, Leaning and Bending - Forward

DO NOT attempt to reach objects if you have to move forward in the seat or pick
them up from the floor by reaching down between your knees.
NOTE: For this procedure, refer to FIGURE 2.6.
Position the casters so that they are extended away from the drive wheels and engage
wheel locks.
FIGURE 2.6 Reaching, Leaning and Bending - Forward

Reaching, Bending - Backward

DO NOT lean over the top of the back upholstery. This will change your center of
gravity and may cause you to tip over.
Keep hands and fingers clear of moving parts to avoid injury.
NOTE: For this procedure, refer to FIGURE 2.7.
Position wheelchair as close as possible to the desired object. Position the casters so that
they are extended away from the drive wheels to create the longest possible wheelbase.
Reach back only as far as your arm will extend without changing your sitting position.
Xtra™
WARNING
WARNING
FIGURE 2.7 Reaching, Bending - Backward
22
Part No 1026793