Adjusting T-Arm Transfer Assists And/Or Side Guards - Invacare XtraTM 1026793 Operator And Maintenance Manual

SECTION 7—ARMS

Adjusting T-Arm Transfer Assists and/or Side Guards

NOTE: For this procedure, refer to FIGURE 7.10.
1. Remove the T-arm from the wheelchair. Refer to Installing/Removing T-Arms on
page 45.
2. Remove the two (2) socket screws that secure the side guard to the bottom clamp.
NOTE: Adjusting the side guards will directly affect the position of the transfer assist.
3. Perform one (1) of the following:
• Small Side Guards - Move the bottom clamp up one (1) of two (2) mounting
positions in the side guard.
• Large Side Guards - Move the bottom clamp up one (1) of three (3) mounting
positions in the side guard.
4. Re-secure the side guard to the bottom clamp with the two (2) socket screws. Torque
to 80-90 in./lbs.
5. Install the T-arm onto the wheelchair. Refer to Installing/Removing T-Arms on
page 45.
Socket
FIGURE 7.10 Adjusting T-Arm Transfer Assists and/or Side Guards
Xtra™
Slide Guard
Bottom Clamp
50
T-Arm
Transfer Assist
Part No 1026793