SECTION 6—SEAT
SECTION 6—SEAT
After any adjustments, repair or service and before use, make sure all attachment
hardware is tightened securely - otherwise, injury or damage may result.
Folding/Unfolding the Wheelchair
DO NOT sit or transfer into the wheelchair unless it is fully open and the seat rails
are fully seated into the seat clamps.
NOTE: For this procedure, refer to FIGURE 6.1.
Unfolding
When unfolding the wheelchair, DO NOT position fingers or hands between the
pivot links or under the conventional seat rails, otherwise injury or damage may
occur.
1. Open the two (2) side frames.
2. Press down on the seat rails with the palms of your hand until the two (2) seat rails sit
flush in the seat clamps on the side frames (Detail "A" of FIGURE 6.1).
Folding
1. Lift up on the seat upholstery until the two (2) side frames come together.
Seat Rail
Pivot
Link
Xtra™
WARNING
WARNING
WARNING
Side Frame
Seat Clamp
(DETAIL "A")
FIGURE 6.1 Folding/Unfolding the Wheelchair
Detail "A" - Seat Clamp
Seat Rail
38
Seat Clamp
Part No 1026793