Reaching, Leaning And Bending - Backward; Transferring To And From Other Seats - Invacare TDXSP2 User Manual

in the presence of a qualified healthcare professional before
attempting active use of the wheelchair
Fig. 2-7
Ensure the motor locks are engaged (not in freewheel mode)
and turn power off before reaching, leaning or bending.
Bend only as far as your arm will extend without changing
your sitting position. Casters should be parallel to the drive
wheel.

2.4.6 Reaching, Leaning and Bending - Backward

Position wheelchair as close as possible to the desired
object. Position the casters so that they are extended
60101831-A
Fig. 2-8
Fig. 2-9
away from the drive wheels to create the longest possible
wheelbase, engage the motor locks and turn power off.
Reach back only as far as your arm will extend without
changing your sitting position.

2.4.7 Transferring To and From Other Seats

WARNING!
Risk of Serious Injury or Damage
Improper transfer techniques may cause serious
injury or damage.
– Before attempting transfers, consult a health
care professional to determine proper transfer
techniques for the user and type of wheelchair.
WARNING!
Risk of Injury or Damage
Misuse of footplate may cause injury or damage.
– DO NOT stand on footplates.
– Ensure the footplates are in the upward
position or swung outward when getting in or
out of the wheelchair.
Fig. 2-10 Front View
Safety
Fig. 2-11 Top View
23