Led Functions - LXE MX3Plus Reference Manual

LED Functions

LED Functions
Across the top of the keypad are LEDs that provide visual cues to current MX3Plus operation. When the LED is not
illuminated, the function is inactive.
2nd
2nd LED. The next keypress is a 2nd keypress. Amber when on. Blinks amber during configuration key sequence.
ALT
The next keypress is an ALT keypress. Amber when on and unlit when off.
CTRL
The next keypress is a CTRL keypress. Amber when on and unlit when off.
SHFT
The next letter is the uppercase letter on alpha keys and the shifted character on the numeric keypad keys. Amber when on and
unlit when off.
CAPS
Uppercase letters are active until the CAPS key sequence is pressed again. Amber when on and unlit when off.
SCNR
Barcode scanner function, affected by both tethered scanners and the scanner endcap. Red – scanning. Green – good scan.
Unlit – scanner is inactive.
BATT B
Backup Battery. When illuminated, the backup battery is charging. When unlit, the backup battery is not charging
STAT
Status Indicator. Amber – device is booting up. Blinking Green when display Suspend state begins.
BATT M
Main Battery. When illuminated, main battery capacity is low. Red – low battery. Blinking Red – power fail. Unlit – Main battery
is not low OR all charge is depleted in both batteries..
CHGR
Charger. When on, the mobile device is receiving external power either from the DC power jack or the MX3Plus is seated in a
powered cradle. Red – Main battery is charging. Amber – Fault or temporary standby (Contact LXE Customer Support). Green
– battery charge is complete and the MX3Plus is connected to external power through the power jack or a powered cradle.
E-EQ-MX3PLUSRG-J [ 21 ] MX3Plus Reference Guide