Save Settings; Restore Settings - Dalsa Spyder3 User Manual

Spyder3 Color Manual
2. Transfer User Settings

2-1 Save Settings

OK > sus 99
OK > lus
X-Modem Transfer to Host. Camera is ready for sending...
Click Receive file... in the Transfer menu to save a settings.
Note that the sus 99 and sfs 99 commands are only communicating to the load
commands (lpc and lus) to use the X-Modem transfer. The contents to be transferred are
whatever is in the current camera memory (lus) or whatever is transferred to the current
camera memory (wus).
For example, if you want to send setting 5 to the host, you communicate: "sus 5", " lus" (
these 2 commands load set 5 to memory), and then "sus 99", "lus" (these 2 commands
send current set (5) to host). Similarly, if you want to load a settings from a host to set
number 5, you communicate: "sus 99", "wus" (these 2 commands load a settings to
current camera memory), and then "sus 5", "wus" (these to commands transfer settings in
current memory to set number (5)).
The same theory is applied to saving and restoring FPN and PRNU coefficients.

2-2 Restore Settings

OK > sus 99
OK > wus
X-Modem Transfer from Host.
Click Send file... in the Transfer menu to load a settings.
DALSA
Make sure to select
the Xmodem.
57
03-032-20059-01