Backyard Discovery Highlander 6010 Owner's Manual page 44

ITEMS NEEDED
(1) H15 Picnic Table Support
(1) H17 Picnic Table Top Support
(4) H19 Picnic Table Seat Legs
(4) H20 Picnic Table Seat Clamps
STEP 23
Attach H15 Picnic Table Support to G6 Base Board with 5/16"x 2" Hex Bolts, 5/16" Lock Washers,
Spike T-Nuts. Attach H17 Picnic Table Top Support to H15 with 5/16"x 2" Hex Bolts, 5/16" Lock Washers,
and 5/16" Spike T-Nuts.
Attach H20 Picnic Table Seat Support to H19 Picnic Table Seat Legs with 5/16"x 2" Hex Bolts, 5/16" Lock Washers,
and 5/16" Spike T-Nuts. You will make two lefts and two rights (per diagram).
Now, fasten Picnic Table Seat Support assemblies to B1 and B2 Tower Legs using 5/16"x 2-3/8" Lag Screws, 5/16" Lock
Washers and Fender Washers. Finish attaching Seat Supports to G7 and G6 with 5/16"x 1-1/2" Lag Screws, 5/16" Lock
Washers and Fender Washers.
B1
B2
G7
G6
H20
H19
H17
H15
H20
H19
PAGE 42
HARDWARE NEEDED
(12) 5/16" x 2" Hex Bolt
(4) 5/16" x 2 3/8" Lag Screw
(8) 5/16" x 1 ½" Lag Screw
(12) 5/16" Spike Tee Nut
(24) Fender Washer
(24) 5/16" Lock Washer
Fender Washers and 5/16"
Fender Washers
Fender
B1
B2