Backyard Discovery Highlander 6010 Owner's Manual page 24

ITEMS NEEDED
(1) G4 Wall Rail
(3) G7 Floor Rails
(1) G6 Base Board
STEP 2
Attach G4 Wall Rail to B1 Front Tower Legs using
5/16"x 4" Hex Bolts, 5/16" Lock Washers,
5/16" Spike T-Nuts.
Attach G7 Floor Rail to top of B3 Back Tower Legs with
5/16"x 4" Hex Bolts, 5/16" Lock Washers,
and 5/16" Spike T-Nuts.
Attach another G7 Floor Rail to Bottom of B3 Back Tower
Legs with 5/16" x 2-3/8" Lag Screws, 5/16" Lock Washers and
Fender Washers and last G7 Floor Rail to B2 Middle Tower
Legs. (Note: Position Between B1 and B2 Tower Legs). Pilot
Drill and secure with 5/16"x 2-3/8" Lag Screws, 5/16" Lock
Washers and Fender Washers
Attach G6 Base Board to B1 Front Tower Legs using
5/16" x 2-3/8" Lag Screws, 5/16" Lock Washers and
Washers . ( Pilot drill using 3/16" drill bit. )
B3
B1
B2
Fender Washers
Fender Washers
.
G7
B2
B1
B3
G7
and
B1
Fender
B1
PAGE 22
HARDWARE NEEDED
(4) 5/16 X 4" Hex Bolts
(12) 5/16 X 2 3/8 Lag Screws
(16) Fender Washers
(16) 5/16" Lock Washers
(4) 5/16" Spike T Nut
G4
G4
G7
B2
B3
G7
G7
G6
B1
B1