2-6.2 Factory Test (By Jp2); 2-6.3 Memory Module Voltage Select (By Jp3/Jp4) - SOLTEK SL-85DR-C User Manual

85DR-C

2-6.2 Factory Test (By JP2)

2-6.3 Memory Module Voltage Select (By JP3/JP4)

This function allows you to select the voltage supplied to the DRAM. The
default voltage (2.5V) should be used unless processor overclocking
requires a higher voltage.
Memory Module Voltage Select
NOTE!
Using a higher voltage may help when overclocking but may result
in shortening of your computer components's life. It is strongly recommended
that you leave this setting at its default.
Factory Test
Only for factory
test.
2.5V
(default)
2.6V
2.7V
2.8V
24
JP2
1 3
1 3
JP3
JP4
1 3
1 3
JP3
JP4
1 3
1 3
JP3
JP4
1 3
1 3
JP3
JP4
1 3