SOLTEK SL-85DR-C User Manual page 68

Hide thumbs Also See for SL-85DR-C:
Table of Contents

Advertisement

85DR-C
On-Chip Primary/
Secondary PCI IDE
Primary
Master / Slave PIO
Secondary
Master / Slave PIO
Primary
Master / Slave UDMA
Secondary
Master / Slave UDMA
USB Controller Select Enabled if your system contains a Universal
USB Keyboard Sup-
AC'97 Audio/Modem This option allows you to decide to enable/disable
Init Display First Initialize the AGP or PCI slot before initializing any
The chipset contains a PCI IDE interface with support
from two IDE channels. Select Enabled to activate
the first and/or the second IDE interface. Select
Disabled to inactivate an interface if you install a
primary and/or second add-on IDE interface.
The choices: Enabled; Disabled.
Choose Auto or Mode 0~4. The BIOS will detect the
HDD mode type automatically when you choose
Auto. You need to set to a lower mode than Auto
when your hard disk becomes unstable.
The choices: Auto; Mode 0; Mode 1; Mode 2; Mode
Ultra DMA33/66/100 implementation is possible only
if your IDE hard drive supports it, if the operating
environment includes a DMA drive, and if your
system software supports Ultra DMA33/66/100.
Select "Auto" to enable BIOS support.
The choices: Auto; Disabled.
Serial Bus (USB) controller and you have USB
peripherals.
Select Enabled if your system contains a Universal
port
Serial Bus (USB) controller and you have a USB
keyboard.
the 845 chipset to support AC'97 Modem.
The choices: Auto; Disabled (default).
other display device on the system. The Coices are:
AGP; PCI Slot.
68
3; Mode 4.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents