SOLTEK SL-85DR-C User Manual page 61

Quick Power On Self
Test
First/Second/Third/
Other Boot Device
Boot Other Device When enabled, this item allows you to select other boot
Swap Floppy Drive When enabled, floppy drives A and B will be exchanging
Boot Up Floppy Seek When enabled, the BIOS tests (seeks) floppy drives
Boot Up NumLock
Status
Gate A20 Option Gate A20 refers to the way the system addresses
Select Enabled to reduce the amount of time required to
run the power-on self-test (POST). A quick POST skips
certain steps. We recommend that you normally enable
quick POST.
The BIOS attempts to load the operating system from
the devices according to your selected priority.
The choices: Floppy; LS120; HDD-0;SCSI;
CDROM;HDD-1;HDD-2;HDD-3;
ZIP100;LAN;RAID;Disabled.
device. The choices: Enabled; Disabled
without any physical connection and modification on the
cables.
to determine whether they have 40 or 80 tracks. Only
360-KB floppy drives have 40 tracks; drives with
270KB, 1.2MB, and 1.44MB capacity all have 80
tracks. Because very few modern PCs have 40-track
floppy drives, we recommend that you set this field
to disabled to save time.
Toggle between On or Off to control the state of
the NumLock key when the system boots. If On,
the numeric keypad is in numeric mode. If off, the
numeric keypad is in cursor control mode.
memory above 1 MB (extended memory). When
set to Fast, the system chipset controls Gate A20.
When set to Normal, a pin in the keyboard controller
controls Gate A20. Setting Gate A20 to Fast improves
system speed, particularly with OS/2 and Windows.
61
Chapter 4 BIOS Setup