SOLTEK SL-85DR-C User Manual page 83

Redstorm Please press <Enter> to start RED STORM OVER-
Overclocking CLOCKING TECH, this option helps user an easy
Tech way to overclocking, it will increase CPU external
clock automatically, when CPU external clock
increasing to unacceptable value, BIOS will restart
your system, then running at acceptable CPU
external clock.
CPU Vcore This item allows users to adjust the CPU Vcore
Select voltage. The instant damage of CPU is due to the
wrong Vcore voltage setting, so we highly recommend
that user should leave this item to Default setting
unless you fully understand it.
AGP Voltage This item allows users to adjust the AGP voltage.
Select The instant damage of Graphics card is due to the
wrong AGP voltage setting, so we highly recommend
that user should leave this item to Default setting
unless you fully understand it.
DIMM Voltage This item allows users to adjust the DIMM voltage.
Select The instant damage of DIMM is due to the wrong
Vcore voltage setting, so we highly recommend that
user should leave this item to Default setting unless
you fully understand it.
CPU Clock This item allows you to select the CPU clock ratio
Ratio so as to change or overclock the CPU frequency.
However, if CPU clock Ratio is locked, this function
is invalid.
Use CPU Linear This item allows you to adjust the CPU clock by
Frequency 1MHz stepping. Default CPU clock is 100MHz. Any
overclocking is taking the risk of unstabilizing the
CPU and system performance.
Choices: Default; Use linear (1MHz stepping).
Chapter 4 BIOS Setup
83