SOLTEK SL-85DR-C User Manual page 62

85DR-C
Typematic Rate Setting When Disabled, the following two items (Typematic Rate
Typematic Rate (Chars
Typematic Delay
(Msec)
Security Option If you have set a password, select whether the
OS Select For DRAM >
Report No FDD For
Win95
and Typematic Delay) are irrelevant. Keystroke repeats
at a rate determined by the keyboard controller in your
system.
When Enabled, you can select a typematic rate and
typematic delay.
When the typematic rate setting is enabled, you can
/ Sec) select a typematic rate (the rate at which character
repeats when you hold down a key) of 6, 8, 10, 12,
15, 20, 24, or 30 characters per second. Default is
"disabled".
Choices: 250; 500; 750; 1000. This option sets the
time interval for displaying the first and the second
characters. If enabled, the time interval is optional.
password is required every time the System
boots, or only when you enter setup.
The choices: system; setup (default).
Select OS2 only if you are running OS/2 operating
64MB system with greater than 64MB of RAM on your
system. Default is "Non-OS2".
Yes: BIOS reports "NO FDD" to Win95.
No (default): BIOS will not report "NO FDD" to Win95.
62