Table of Contents
Advertisement
Table 3 - 4: Primary And Secondary Master And Slave IDE Submenus (Continued)
Feature
DMA Mode
SMART Monitoring
32Bit Data Transfer
IDE Configuration Submenu
Feature
Onboard IDE
Operate Mode
Enhanced Mode
Support On
Configure S-ATA as
RAID
Serial-ATA
BOOTROM
IDE Detect Time
Out (Sec)
TM700 User Guide - Configuring Your System
Choices or
Description
Display Only
Auto
Selects the DMA mode used for
SWDMA0
moving data to/from the drive.
SWDMA1
This field is informative only for
SWDMA2
Type Auto.
MWDMA0
MWDMA1
MWDMA2
UDMA0
UDMA1
UDMA2
UDMA3
UDMA4
UDMA5
UDMA6
Auto
Enables or disables the Self
Disabled
Monitoring, Analysis and
Enabled
Reporting Technology
(S.M.A.R.T.)
Disabled
This option allows you to
Enabled
enable or disable 32 bit IDE
transfers.
Table 3 - 1: IDE Configuration Submenu
Choices or
Description
Display Only
Compatible Mode
Set this feature to Compatible
Enhanced Mode
Mode when using a legacy
operating system (i.e. Windows
98, Millennium, NT).
Set it to Enhanced Mode when
using native operating system
(i.e. Windows 2000 or XP)
P-ATA+S-ATA
Leave this feature set to default
S-ATA
S-ATA to be able to use the
P-ATA
EXPRESSBUILDER or CD
No
Allows you to configure S-ATA
Yes
channels to function either as
standard IDE or as RAID.
See RAID Application
documentation for details.
Disabled
Only if Configure S-ATA as
Enabled
RAID is set to Yes.
Allows you to enable or disable
the S-ATA boot ROM.
0, 5, 10, 15, 20, 25,
Allows you to set the time out
30, 35
value for detecting ATA/ATAPI
devices.
3 - 6
Your Setting
Your Setting
Advertisement
Table of Contents
