Replacing The 3.5/5.25-Inch Bracket - NEC Express 5800 TM700 User Manual

Replacing the 3.5/5.25-inch Bracket:

1. Slide the 3.5/5.25-inch bracket inside the chassis until it clicks in position.
2. Replace the screw securing the HDD bracket and the 3.5/5.25-inch bracket
together.
3. Re-connect all cables (power, data, and others, if applicable) to the installed
3.5- and 5.25-inch devices. See "Cabling the Device" on page 4-32.
TM700 User Guide - Upgrading Your System
Figure 4 - 8 : Replacing the Bracket
Figure 4 - 9 : Replacing the Screw
4 - 11