Table of Contents
Advertisement
Removing a 5.25-inch device
1. Remove the right side door. See "Removing the Right Side Door:" on page 6.
2. Remove the front panel. See "Removing the Front Panel:" on page 8.
3. Remove the 3.5/5.25-inch bracket. See "Removing the 3.5/5.25-inch Bracket:"
on page 9.
4. Remove the four screws (two on each side) securing the 5.25-inch device.
5. Slide the 5.25-inch device gently outwards, through the front of the chassis, and
set it aside.
6. Use a plastic slot cache to close the available 5.25-inch bay. Simply push it into
the bay until it clicks into place.
7. Replace the 3.5/5.25-inch bracket. See "Replacing the 3.5/5.25-inch Bracket:" on
page 11.
8. Replace the front panel. See "Replacing the Front Panel:" on page 8.
9. Replace the right side door. See "Replacing the Right Side Door:" on page 6.
TM700 User Guide - Upgrading Your System
Figure 4 - 11 : Removing a 5.25-inch Device
4 - 13
Advertisement
Table of Contents
