Main Menu; Primary And Secondary Master And Slave Ide Submenus - NEC Express 5800 TM700 User Manual

Main Menu

Feature
System Time
System Date
Legacy Diskette A
Primary IDE Master
Primary IDE Slave
Secondary IDE
Master
Secondary IDE
Slave
IDE Configuration
System Information

Primary and Secondary Master and Slave IDE Submenus

Table 3 - 4: Primary And Secondary Master And Slave IDE Submenus
Feature
Type
LBA (Large Mode
Block (Multi-Sector
Transfer)
PI0 Mode
TM700 User Guide - Configuring Your System
Table 3 - 3: Main Menu
Choices or Description
Display Only
HH:MM:SS Set the System Time.
MM/DD/YYYY Set the System Date.
Disabled Hidden if not detected.
1.44/1.25 Mb 3½"
Selects sub-menu
Selects sub-menu
Selects sub-menu
Selects sub-menu
Selects sub-menu
Selects sub-menu
Choices or Description
Display Only
Auto Select Auto if a device is
Not Installed attached to the IDE channel.
Disabled LBA stands for "logical block
Auto addressing". Instead of
referring to locations by passing
to the disk a cylinder, head and
sector number (CHS
addressing), the sectors are
serialized so that each just has
an integer number; 0, 1, 2, etc.
up to the total number of
sectors on the disk. Disabled
will disable the LBA mode, Auto
will enable it if the IDE device
supports it. This field is
informational only, for Type
Auto.
Disabled Enales or disables multiple
Auto sector transfers. This field is
informational only, for Type
Auto.
Auto Select the method for moving
0 data to/from the drive. This field
1 is informational only, for Type
2 Auto. This field is updated to
3 display only the modes
4 supported by the attached
device.
3 - 5
Your Setting
Your Setting