Keyboard And Mouse; Peripheral Bays - NEC Express 5800 TM700 User Manual

The motherboard uses one Intel® 82547EI Gigabit Ethernet Controller and supports
10Base-T/100Base-TX/1000Base-T network systems.
The 82547EI controller supports the following features:
Full-duplex Gigabit throughput and higher platform performance with Communi-
cation Streaming Architecture (CSA)
System health monitoring and authenticated remote power control with ASF 2.0
ACPI
The motherboard supports the Advanced Configuration and Power Interface (ACPI) as
defined by the ACPI 2.0 specifications. An ACPI aware operating system can put the
system into a state where the hard drives spin down, the system fans stop, and all pro-
cessing is halted. However, the power supply will still be on and the processors will
still be dissipating some power, so the power supply fans will still run.
The system board supports sleep states s0, s1, s4, and s5:
s0: Normal running state.
s1: Processor sleep state. No context will be lost in this state and the processor
caches will maintain coherency.
s4: Hibernate or Save to Disk: The memory and machine state are saved to disk.
Pressing the power button or other wakeup event will restore the system state from
the disk and resume normal operation. This assumes that no hardware changes
have been made to the system while it was off.
s5: Soft off: Only the RTC section of the CSB are running in this state. No context
is saved by the OS or hardware.
connected.

Keyboard and Mouse

The keyboard/mouse controller is PS/2-compatible.

Peripheral Bays

Your Storage server features two 5.25-inch bays that you can use with either a hard disk
drive, an optical device such as a CD-ROM, DVD-ROM or COMBO DVD-ROM CD-
RW, or a tape backup unit. See "Optional Features" on page 1-12.
TM700 User Guide - System Overview
Note: The system is off only when the AC power cord is dis-
1 - 11