NEC Express 5800 TM700 User Manual page 79

TM700 User Guide - Upgrading Your System
5. Remove the two screws (B) holding the HDD bracket to the front of the
chassis.
Figure 4 - 17 : HDD Bracket Screws
6. Slide the HDD bracket backwards, and set it aside.
7. The hard disk drive is secured to the bracket with 4 screws located either on
both sides (slot C) or on top of the hard disk drive (slot A). Remove these
screws, and slide the hard disk drive out of the bracket.
8. Set the hard disk drive aside.
4 - 19