AutoDome 700 Series IP PTZ Camera
5
Cable and Wire Standards
CAUTION!
Installation should only be performed by qualified service personnel in accordance with the
National Electrical Code or applicable local codes.
CAUTION!
All wires for installation applications must be routed through a grounded conduit.
5.1
Power
115/230 VAC
Copper Wire
5.2
Wire Distance Guide for Pendant
24 V to AutoDome
AutoDome 700, Indoor
AutoDome 700, Outdoor
Table 5.1 Maximum Wire Distances from Power Supply to AutoDome Pendant
5.3
Video and Control Cables
5.3.1
Using Ethernet to Transmit Video and Control
CAUTION!
Ethernet connections must be made to non-exposed (indoor) networks only.
The AutoDome VG5 700 series connects to a 10 Base-T/100 Base-TX network either directly or
via a switch. Both video and control are transmitted over a standard TCP/IP network using the
built-in Web server.
Cable Type
Maximum Distance
Bandwidth
Terminal Connector
WARNING!
Do not connect a coaxial cable while the RJ45 Ethernet cable is connected.
Bosch Security Systems, Inc.
To comply with local codes.
VA / Watts
14 AWG (2.5 mm)
35 / 19
99 m (325 ft)
60 / 55
58 m (190 ft)
CAT-5E or CAT 6 Ethernet
100 m (328 ft)
10 Base-T/100 Base-TX
RJ45, Female
Installation Manual
Cable and Wire Standards | en
16 AWG (1.5 mm)
18 AWG (1.0 mm)
62 m (205 ft)
39 m (129 ft)
36 m (119 ft)
23 m (75 ft)
F.01U.215.779 | 1.0 | 2011.07
57