System Requirements - Intel ICH10R User Manual

NOTE: Functions of each version will differ from each other, and will be based on the function descriptions of each
version.

System Requirements

◇ First OS must be Windows 2000/XP/Vista
◇ Support Only Windows OS (No Linux)
◇ Windows server OS and Windows NT not supported
◇ Minimum of Intel 486 or above, 16MB of memory or above
◇ Minimum of 500MB free/usable space or above
◇ Support for SCSI & SATA Hard disk
Pro Magic Plus only supports SCSI hard disk with Windows 2000 or OS above
Notice Before Installation
1. Before install Pro Magic Plus, turn off all anti-virus software. (Include BIOS anti-virus function)
2. Pro Magic Plus does not support multiple PRI partitions. If you have multiple PRI partitions,
please repartition your HD before installation.
3. If your HDD is not fully partitioned (with un-partitioned/unused space at end of HDD), please
repartition the HDD before install Pro Magic Plus.
4-12 G.P.I. Function LED Display
1. All LED on: CPU working on high-load state and
the motherboard is working at full-speed with non-
power saving mode.
3.
2 LED on, 4 off: motherboard is working on
partial power saving mode.(the LED off indicate
the relative power phase working with idle mode ).
Notice：
The above LED status in these illustrations is for reference use only. There might be other
LED display status depending on different working state. The more LEDs off, the more inductances
works on idle mode.
2．4 LED on, 2 off: Motherboard is working on
partial power saving mode(the LED off indicate
the relative power phase working with idle mode ).
4. All LED off: Motherboard is not in the working
mode.
48