Pc Health Status; Smart Fan Configuration - Intel ICH10R User Manual

3-10 PC Health Status

This section shows the Status of you CPU, Fan, and Warning for overall system status. This
is only available if there is Hardware Monitor onboard.
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
PC Health Status

Smart FAN Configuration

H/W Health Function
CPU Temperature:
System Temperature:
CPUFAN Speed:
SYSFAN1 Speed:
SYSFAN Speed:
Vcore
NB1.1V :
+5V
+12V
5VSB
VDIMM :
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Discard Changes
H/W Health Function,
it displays information list below when set as below. The choice is either Enabled or
Disabled.
CPU Temperature/ System Temperature/CPUFAN/SYSFAN1 Speed/SYSFAN2 Speed
/Vcore/NB 1.1V/+5V/+12V/5V SB/VDIMM
This will show the CPU/ /System voltage chart and FAN Speed, etc.
3-10-1 Smart FAN Configuration
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
FAN1 Mode Setting
Temperature1 Limit of Highest
Temperature1 Limit of Second
Temperature1 Limit of Third
Temperature1 Limit of Lowest
FAN1 Highest Setting
FAN1 Second Setting
FAN1 Third Setting
FAN1 Forth Setting
FAN1 Lowest Setting
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Discard Changes
Smart FAN Configurations FAN1 Mode Setting
The optional settings are: Auto Fan by RPM; Auto Fan by Dutycycle; Manual Mode by RPM
and Manual Mode by Dutycycle.
PC Health Status
Press Enter
Enabled
50 ° C/122 ° F
60 ° C/140 ° F
2923RPM
N/A
N/A
1.242v
1.160V
5.045V
11.440v
4.961v
1.468V
F6:Fail-Safe Defaults
Smart FAN Configuration
Auto Fan by RPM
050
040
030
020
100
080
070
060
050
F6:Fail-Safe Defaults
35
Help Item
F7:Optimized Defaults
Help Item
Fan Configuration
Setting
F7:Optimized Defaults
Mode