Remote Trunk Open; Ch-5: Dome Light Supervision; Ch-5: Arm W/Engine Running - Eaglemaster E5 Instruction Manual

2-way car alarm system
Table of Contents

Advertisement

- Remote trunk open:

Simply press and hold button
to open the trunk. When armed if remote trunk open or close, the system will give one light
flash and the 2-way remote will give one beep sound. The 2-way LCD display icon as under:
2-way LCD display :
Note:
If trunk has been remote opened in arming position, trunk switch will delay sensing for
5 seconds, and the shock sensor will be bypassed.
- Channel-5 (-) output(programmable):
This channel "Gray/black wire" is a negative (-500mA) output features, this feature
can be controlled " Dome light output / Arm W/Engine running / Turbo mode) ".
Dome Light:
If programmed with the feature , the channel will constant output 30sec. when disarming .
Turn ignition switch ON will stop the channel output.
Arm W/Engine running:
If programmed with the "Arm W/Engine running, this feature for the car to keep engine
running after arriving at your destination.
To operate this feature by pressing
siren will give one chirp and the LED will start flashing Green color, at the time the system is
in standby mode, the owner must follow under process to activate the "Arm W/Engine
running " mode.
(1) Within 15sec. Turn Ignition OFF (engine still keep running), open and close door to
leave the car.
Note: If within this 15sec. press any button once will exit the mode, LED off.
(2) While leaving the car by open and close the door, within 5sec. press button
the system will arm immediately, the parking lights will flash once every 5 seconds , and
the status LED will flashing Green color, however the engine will still keep running.
The 2-Way remote will respond under icons flashing as long as turbo time finished.
2-way LCD display :
Exit mode :
Pressing button
will delay 15 seconds and exit turbo mode, this delay time is allow the user using the key
turn ignition on without stop the engine running.
NOTE: 1. In engine running mode, the sensor zone trigger will be bypassed.
2. In engine running mode, if door, hood or trunk has been triggered, engine will
stop running and alarming the system, simply press button
over 2 seconds, the channel will output for 1 second pulse ,
Note: (1) Ignition ON does not allow to remote trunk
for 2sec. while driving or ignition ON , the
once of the remote control within engine running mode , the system
open, unless one door is opened.
(2) Armed, if trunk opened over 1 minutes, the
2-way remote will give pre-warn beep sound.
Note:
(1) After leaving the car, within 5sec.
If press wrong button will exit mode.
(2) After leaving the car, within 5sec.
If without press
mode automatically.
-19-
once,
button will exit
to disarm .

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents