Panic Mode; Dual Stage Shock Sensor; Remote Sensor By Pass - Eaglemaster E5 Instruction Manual

- Panic mode:

If you are threatened in or near your vehicle, you can attract attention by press button
for 2sec. system will triggering for 30sec. To stop Panic mode at any time, simply press
any button once.
Note: if Panic mode activate in disarmed position, the 2-way remote will respond melody
sound and LCD indicates flashing icons as under:
2-way LCD display :

- Dual stage shock sensor:

This device only activates after 8 seconds of arming state; this is preventing from the
weak impact caused by the driver while leaving the car.
The device operates:
-Light impact will activate the 1st stage sensor by giving 5 short warning chirps. 2-way
remote will respond 5 beeps and flashing icon as under.
2-way LCD display :
-Heavy impact will activate the 2nd stage sensor and trigger the alarm for 30sec. 2-way
remote will respond melody and flashing icon as under.
2-way LCD display :
NOTE: Adjustments are made via the rotary control above the shock sensor.

- Remote sensor by pass :

This system offer 2stage sensor optional. Within 8sec. after set arming, to press button
once , the system will give 2 short chirps and 2 lights flash, thus the 1st stage shock
sensor has been turn off.
Press button
flash, thus the 2nd stage shock sensor has been turn off.
If press button
turn ON again.
2-way LCD display :
Note: - if remote sensor bypassed, it will be detected again by next arming.
- if armed with silent mode, to operate sensor bypass will only indicate by lights flash.
once again, within 8sec. the system will give 3 short chirps and 3 lights
once (at 3 times) again within 8sec. of arming the shock sensor will
1st stage sensor bypass.
Under Panic mode, the 2-way remote
will respond melody sound and
flashing icons .
+ 5 beeps sound
+ Melody sound
X
PASS
-16-
Note: This paging feature is
can be programmed to
With or Without .
2nd stage sensor bypass.
X
PASS