Time adjust mode
Besides operating for alarm functions, LCD remote control additionally provides 12-hour
clock, alarm clock.
Instructions:
1. Press and hold Button
2. Press button
AM/PM indicator
12-hour display
3. Press button
The button may be held down to scroll faster.
4. Press button
Note: The remote will revert to normal operation from the set mode when 10-seconds has
elapsed without a button entry.
Alarm clock setting
This function useful to warning the user by pre-setting alarm clock time, if setting time up,
the LCD remote will give beep sound for 1 minutes. (Press any button once will stop beep).
Instructions:
1. Press button
be heard and alarm clock icon flashing:
2. Press button
3. Press button
The button may be held down to scroll faster.
4. Press button
Press button
Note: The remote will revert to normal operation from the set mode when 10-seconds has
elapsed without a button entry.
for 3sec. to enter time-setup mode, 1 beep will be heard.
to select Hour & Min adjust setting. Icon flashing to indicate.
AM
PM
to turn up the numbers. Press button
to exit the setting mode. 2 beep will be heard.
for 3sec. To enter alarm clock time-setup mode, 1 beep sound will
AM
PM
to select Hour & Min adjust setting. Icon flashing to indicate.
to turn up the numbers. Press button
to enable the alarm clock. 1 beep will be heard and exit the mode.
to disable the alarm clock. 2 beep will be heard and exit the mode.
Minutes display
-10-
to turn down the numbers.
to turn down the numbers.