Sendall - Polycom SpectraLink 8000 Administration Manual

Svp server

Hide thumbs Also See for SpectraLink 8000:

Table of Contents

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco

SendAll

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Note the navigation options at the bottom of the screen. Press Enter to

change a value, ESC to exit the screen, and the arrow keys to move

the cursor.

In an IP system with multiple SVP Servers, the

provided to speed configuration and to ensure identical settings. The

option allows you to send that configuration parameter to

S=SendAll

every SVP Server on the LAN.

address is established on EACH SVP Server via the serial connection.

If you anticipate identical settings across the LAN, set just the IP

address and custom hostname (if desired) for each SVP Server using

the initial serial connection. Then connect via the LAN and use

to set identical configuration options for all SVP Servers.

is to be utilized in your system, all passwords must be

SendAll

identical. DO NOT CHANGE THE PASSWORD AT THE INITIAL

CONFIGURATION IF THE SendAll OPTION IS DESIRED. Use the

default password and change it globally if desired after a LAN

connection is established for all SVP Servers.

If independent administration of each SVP Server is desired, the

passwords may be set at initial configuration.

SendAll

can only be used after the IP

SendAll

PN: 1725-36031-001_H.doc

option is

SendAll

Table of Contents