Installing and removing drives
For cooling, protection against fire and in order to comply with EMC regulations, you must
!
refit the plastic cover.
It may be necessary to modify the entry for the drive in the BIOS Setup.
i
Changing the floppy disk drive
Ê
Open the casing (see "Opening the casing").
Ê
Pull the data and the power supply connectors from the floppy disk drive (1).
Ê
Remove the screws (2) on the left side of the floppy disk drive.
A26361-K657-Z101-4-7619
1
Ê
Press the plastic drive cover into the front
panel until it snaps in place.
Ê
Close the casing (see "Closing the
casing").
2
System expansions
41