Removing A Usb Front Panel; Extensions To The System Board; Upgrading Main Memory - Fujitsu Siemens Computers SCENIC T Operating Manual

System expansions

Removing a USB front panel

1
Ê
Remove the system board carrier as described in "Replacing processor".
Ê
Disconnect the cable from the USB front panel and from the system board.
Ê
Remove the screws (1) and take out the USB front panel of the slot (2).
Ê
Remount the bay cover from the front.

Extensions to the system board

Details on whether you can upgrade the main memory or the processor are provided in the
Technical Manual for the system board. Below the necessary steps are described to enable you to
work on the system board.
Ê
Open the casing (see "Opening the casing").

Upgrading main memory

Ê
Upgrade the memory as described in the Technical Manual for the system board.
Ê
Close the casing (see "Closing the casing").
48
2
Extensions to the system board
A26361-K657-Z101-4-7619