Changing The Floppy Disk Drive - Fujitsu Siemens Computers CELSIUS M Operating Manual

Changing the floppy disk drive

► Open the casing (see "Opening the casing" section).
► Remove the front (see "Removing the front panel" section).
► Disconnect the cables connected to the floppy disk drive.
► If it is present, pull the cable of the front USB or USB-audio interface from the mainboard (see
also the technical manual for the mainboard).
Removing the floppy disk drive
► Press the EasyChange rails in the direction of the arrows (1).
► Pull the floppy disk slide-in module out of the casing (2).
A26361-K665-Z125-1-7619, Edition 1
1
1
System expansions
51