Removing An Accessible Drive - Fujitsu Siemens Computers SCENIC T Operating Manual

System expansions
2
Ê
Slide the drive into its bay (1).
Ê
Fasten the drive into place with the screws (2).
Ê
Plug the connectors of the data cable and the power supply cable into the drive (3). Make sure
the polarity is correct.
Ê
Close the casing (see "Closing the casing").
It may be necessary to modify the entry for the drive in the BIOS Setup.
i

Removing an accessible drive

Ê
Open the casing (see "Opening the casing").
1
Ê
Pull the data and the power supply connectors from the desired drive (1).
Ê
Remove the screws (2), and take the drive out of the PC casing (3).
40
2
1
2
Installing and removing drives
3
3
A26361-K657-Z101-4-7619
2