Introduction; Notational Conventions - Fujitsu Siemens Computers SCENIC T Operating Manual

Introduction

This operating manual tells you how to put your PC into operation and how to operate it in daily use.
The Operating Manual applies for all configuration levels. Depending on the configuration level
chosen some of the hardware components described may not be available on your PC. Please
observe the notes on your operating system.
You can incorporate operable drives (for example DAT drive) as well as other boards.
Depending on the configuration selected, the operating system is preinstalled on your hard disk (e.g.
Windows 2000).
Your PC has a number of security features to ensure that no unauthorised persons can access your
data, for example, you can activate a screen saver with password protection. The security functions
in the BIOS Setup also allow you to protect your data by means of passwords.
DeskUpdate allows you under some operating systems to easily and quickly install the latest drivers
and operating system extensions with a few mouse clicks. DeskUpdate is contained on the "Drivers
& Utilities" CD.
Further information on this PC is provided:
·
in the manual „Safety and Ergonomics"
·
in the "Warranty" manual
·
in the operating manual for the monitor
·
in the Technical Manual for the system board
·
in the "BIOS Setup" manual
·
in your operating system documentation
·
in the information files (e.g. *.TXT, *.DOC, *.WRI, *.HLP)
Some of the manuals listed can be found on the "Drivers & Utilities" CD provided with
i
your computer. These manuals can be read and printed with Acrobat Reader, also
contained on the "Drivers & Utilities" CD.
Keep this operating manual together with your device. If you pass on the device to third parties, you
should include this manual.

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:
indicates information which is important for your health or for preventing physical damage.
!
indicates important information which is required to use the system properly.
i
Ê
Text which follows this symbol describes activities that must be performed in the order shown.
Text in this typeface indicates screen outputs.
Text in italics indicates commands or menu items.
"Quotation marks" indicate names of chapters or terms.
A26361-K657-Z101-4-7619
1