Replacing Processor - Fujitsu Siemens Computers SCENIC T Operating Manual

System expansions

Replacing processor

To replace the processor you must remove the system board bracket.
3
1
1
Replace the processor (see the Technical Manual for the system board).
3
3
50
2
1
2
Extensions to the system board
Ê
Open the casing (see "Opening the
casing").
Ê
Remove all boards (see "Removing a
board").
Ê
Unscrew the screw on the system board
rack (1), push the system board rack
somewhat in the direction of the arrow (2)
and then tilt it out upward (3).
Ê
Fold the system board rack into the casing
again (1) and push it back into its original
position (2).
Ê
Fasten the screw (3).
Ê
Reinstall all boards (see "Installing a
board").
Ê
Close the casing (see "Closing the
casing").
A26361-K657-Z101-4-7619