Table of Contents
Advertisement
Connecting the PC to the mains voltage
a = Notch for inserting the screwdriver
►
Check the voltage setting.
Some units have a wide-range power supply, depending on the configuration level. This
!
means that manual voltage setting is not necessary for these devices. Therefore there is
no switch available for the voltage setting.
The following refers to the other devices:
The value indicated with an arrow must be compatible with the local rated voltage:
115 = 100 V to 127 V
If the voltage setting is incorrect, then lift out the manual voltage adjuster with a
screwdriver (a), turn it to the required setting and reinsert it.
A26361-K666-Z120-1-7619, edition 3
100 V - 125 V
a
200 V - 240 V
a
230 = 200 V to 240 V
Preparing for use
11
Advertisement
Table of Contents
