Connecting A Keyboard; Connecting The Device To The Mains Voltage - Fujitsu Siemens Computers Esprimo C Operating Manual

Connecting a keyboard

Depending on the equipment level selected, your device will be supplied with a standard keyboard or
a USB keyboard.
Connecting standard keyboard
Use the supplied keyboard cable only.
► Plug the rectangular connector of the keyboard cable into the rectangular socket on the
underside or on the rear of the keyboard.
► Plug the round plug of the keyboard cable into the keyboard port
Connecting USB keyboard
Use the supplied keyboard cable only.
► Plug the rectangular connector of the keyboard cable into the socket on the underside or on the
rear of the keyboard.
► Insert the flat rectangular USB plug of the keyboard cable into a USB port

Connecting the device to the mains voltage

The device is fitted with a wide voltage range power supply. This means you do not need
i
to set the nominal voltage manually for these devices. Therefore there is no switch
available for the voltage setting.
► Connect the power cable to the device (1).
► Plug the power plug into a grounded mains outlet (2).
A26361-K1009-Z120-1-7619, edition 4
Preparing for use
on the device.
of the device.
2
1
11